-  
 

 

Search kanmor.com

  -  
  kanmor Products  Integrated System Overview
The kanmor Reset Controls 262e, 362e and 363e are able to integrate the underfloor heating system's water temperatures with the system's zoning devices three different ways:

Outdoor Reset to Multiple Zones
The kanmor Reset Controls can be connected to a wiring center to provide an outdoor reset water temperature to multiple zones. The 032e can be connected to the control to allow for water temperature setback of the system.
Multiple Zones

Outdoor Reset to Single Zone or Thermostatic Valve Zoned System
Single Zone or Thermostatic
A single Room Temperature Unit (RTU 062e or 063e) can be connected to the kanmor Reset Controls to provide Indoor Temperature Feeedback and room air temperature adjustment. This can be done for a single zone system or for a thermostatic radiator valve zoned system. A kanmor Timer 032e can be connected to the control to allow for air temperature setback of the system.

Outdoor Reset for Multiple Zones with Individual Zone Schedules
The kanmor Zone Control 369e can be connected to the kanmor Reset Controls 262e, 362e and 363e to provide Indoor Temperature Feedback and Zone Synchronization for multiple zones. The Zone Control 369e has an internal timer that allows for the setting of individual zone schedules.
 Multiple Zones with Schedules

 

Integrated Zone Control
Indoor Temperature Feedback
Fine tunes the supply water temperature based on the heat requirements of the zones. This forces the zones to stay on for longer periods and provides a more uniform flow of heat into the space.
Zone Synchronization
The on and off periods for each zone are synchronized and coordinated to provide a relatively consistent load. The consistent load increases the overall efficiency by minimizing short cycling of the heat source.

 
©2006 kanmor Control Systems Ltd.